CARVIN DC-100 Black 1980s Maple Body Maple Neck Ebony FB w/Soft Case

This is an entry-level Carvin model produced in the early 1980s.
It features two high-output Carvin M22 humbucker pickups, and a simple control configuration of two volume controls, two tone controls, and a 3-way selector.
Other features include a brass nut, Schaller tuners, and a hardtail bridge.
Unlike typical guitars, the controls are positioned with the front pickup on the selector side and the rear pickup on the body end.
There are multiple dents with paint chips and cracks on the headstock and body corners, and numerous dents on the back of the body caused by buckles.
The parts show tarnish, rust, and plating peeling, and the jack plate is bent.
Overall, there are small dents and scratches.
[Product Specifications]
Product Rank: B+: Some scratches, but no problems for normal use.
Serial Number: 9691
Year of Manufacture: Country of Manufacture: USA
Case: Non-original soft case
Accessories: -
Weight: 3.86kg
Truss Rod: [No problems] Rod checked up to 60 degrees left and right, no problems.
Fret Life: [Within normal range] Fret height is sufficient for playability.
String Height (Bass String Side): 2.0mm at 12th fret
String Height (Treble String Side): 1.5mm at 12th fret
Nut Width: 41.6mm
Scale Length: 628mm (24.75")
Repair/Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, fret leveling
*As this is a used item, there may be scratches, dents, etc. that are difficult to see in the photos or not mentioned. Please understand this in advance.
*If truss rod, fret remaining, string height, etc. are listed, these were measured by our staff during setup, and may change due to differences in climate, humidity, and other environmental factors.
These values are intended as a reference for purchase and we cannot guarantee that they will be the same when you receive the item.